Normal operation of the rotary kiln maintenance work needs to be done

Article source：

In normal use of the rotary kiln, rotary kiln maintenance people need to make great efforts, here we come to look at these maintenance tasks are what? 1, each part of the transmission system and gear wheel must always check and found that noise, vibration and heat are not normal circumstances should be dealt with. 2 Check the tire and the contact between the roller and wear is uniform, without excessive force and the emergence of facets Pock and so on. 3, according to the wheel between the belt and the plate in a relative displacement in turn identified the gaps and wear, note pad welds for cracks pattern and so on. 4, each class should be checked repeatedly drive the anchor bolts flooring and supporting device and bolts, tighten if loose in a timely manner. 5, based on whether the vibration phenomena and subsidence phenomenon. 6, kiln kiln seals and seal tightness is good, friction and wear parts is serious. 7 watts per hour to check prop shaft bearing temperatures and lubrication once and observe the thrust ring and liner - the gap is in the correct position. 8, must be checked every week and start a secondary drive, but do not connect the clutch to ensure the main power supply is suddenly interrupted the smooth running. 9, always check the cylinder (especially burning zone) temperature below 400 ℃ maintained regularly check the cylinder air-cooled unit is working properly. 10, maintenance work should be closely watching fire workers, strengthen ties, to understand the situation and the main motor calcining kiln operation. Henan YuFeng is specialized in the development and production of rotary kiln mining machinery manufacturers, the plant has two decades of production history, is the Central Plains of the largest manufacturers of rotary kiln production, the company has in Gansu, Inner Mongolia, Sichuan, Guangxi and other national many have been built and put into use the rotary kiln. The above article by Henan YuFeng Heavy Machinery finishing release, reproduced, please indicate the source!